Maintenance of wardrobe

1. The maintenance and cleaning of the surface of the wardrobe should be avoided as much as possible during use to avoid damage and scratches on the wardrobe surface. If there are slight scratches and scratches on the surface, a cotton cloth dipped in a mixture of cigarette ash, lemon juice, or stir fried oil can be used to wipe it. After it dries, it should be waxed for maintenance. If the scratches are deep or the scratches are severe, it is necessary to mix the same color paint for color correction, or purchase a color correction agent from the wardrobe specialty store to repair it.
2. Regularly inspect the three in one connectors of the wardrobe backboard and layer board, especially in case of severe external impact. If any looseness is found, tighten it in a timely manner and inject a small amount of lubricating oil to prevent rust corrosion. If there is a malfunction during secondary disassembly or assembly, the specialty store or manufacturer should be notified in a timely manner to assist in handling it. Prevent external forces or heavy objects from impacting or colliding with the overall wardrobe slide and door panel. Use gentle pushing and pulling movements, and do not forcefully push or collide.
3. The maintenance of wardrobe doors should keep them clean and regularly clean, and there should be no debris or dust inside the tracks to prevent heavy objects and sharp objects from hitting the tracks. When cleaning, you can use a semi wet cloth to wipe the cabinet door and body, and avoid using corrosive cleaning agents. The dust on the track can be cleaned with a vacuum cleaner or a small brush, and metal accessories such as clothes, handles, metal handles, etc. inside the wardrobe can be wiped with a dry cloth. Dust on the surface of the wardrobe can be removed with a feather duster or soft cloth. If there are stains on the surface, they can be wiped off with sandwax. If households have the conditions, they can regularly use oil and wax to maintain the surface of their wardrobes, use a soft cloth to wipe the hardware components, and do not use corrosive chemical cleaners or acidic liquids for cleaning. If black spots are found on the surface that are difficult to remove, they can be wiped with less kerosene.
4. The placement of the wardrobe should be balanced during use, avoiding placing it in high, highly vibrating, damp, or directly exposed to sunlight. Keep the room ventilated, and avoid the surface of the overall wardrobe from contacting corrosive liquids, such as alcohol, banana water, gasoline, nail polish, strong acid, strong alkali and other liquids.
5. The moisture-proof of the wardrobe, the main body of the wardrobe is made of board. If not paid attention to moisture-proof, the board is prone to expansion and deformation, which can cause damage to the wardrobe and make it unusable. So in the spring rainy season, it is important to maintain ventilation and breathability in the room. Regularly wipe the wardrobe with a dry cloth, and place some desiccants inside the wardrobe. It is important to note that the desiccants used should not have any other odors to prevent the volatile odor from damaging the clothes inside the wardrobe. Common environmentally friendly methods such as charcoal and quicklime can be used, and it is important to avoid touching other clothing during use.